Association between oral health status and occlusal bite force in young adults.

Background/purpose: Oral health is related to general health and a person's overall well-being. The aim of the present study was to explore the association between oral health status and bite force among young adults. Materials and methods: Maximum bite force (MBF) was measured using Dental Prescale II in conjunction with a pressure-sensitive film and bite force analyzer in 40 young adults aged 20 to 40. Supragingival dental plaque was collected and cultured. Plaque weight, pH, and colony counts were assessed. The decayed, missing, and filled teeth index (DMFT) and body mass index (BMI) were recorded. Results: Bite force was negatively correlated with the number of missing teeth and the sum of missing and filled teeth. When the filled-to-remaining-teeth ratio (F/R ratio) was less than 8%, the bite force was significantly higher compared to an F/R ratio of 8-25%. Additionally, the amount of total bacteria was positively correlated with total bite force, and the quantity of Streptococcus mutans (S. mutans) along with total bacteria was positively correlated with bite force in the molar region (∗P < 0.05). The molar region predominantly contributed to bite force. Conclusion: Elevated levels of cariogenic bacteria may increase the risk of tooth loss, subsequently leading to reduced bite force. This reduction in bite force can further impact the efficiency of chewing function and, consequently, the quality of life. An F/R ratio above 8% could be easily calculated clinically and could serve as a guide to identify patients, particularly young adults, at risk of reduced bite force.

A Preliminary Report of Maximum Voluntary Bite Force of Young Indian Population.

Introduction: The measurement of bite force is increasingly gaining importance in dentistry. This preliminary report evaluates the maximum voluntary bite force (MVBF) of young healthy individuals with normal occlusion and correlates the effect of age and gender with the maximum bite force (MBF). Materials and Methods: 405 participants in the age group of 18 to 40 years were selected from the outpatient department meeting inclusion and exclusion criteria. MVBF was measured with the help of a digital device called "Byte" at incisors, right first molar, and left first molar region. Results: There was a strong correlation between age with bite force. Bite force increased with age. Males had more bite force than females. The posterior region had higher bite force than the anterior region. Conclusion: Measurement of bite force is very important for every patient undergoing restorative treatment. The "Byte" device was found to be very efficient.

An Innovative Technique for Assessment of Bone Change, Bite Force, and Retention of the Single-Implant-Supported Mandibular Overdenture: A Clinical Study.

This study is the first study to incorporate a novel approach to single-implant-retained mandibular overdenture with a bar attachment on a single implant in the symphysis region. The use of a single-implant-retained bar overdenture significantly improved patients' chewing efficiency, indicating enhanced overdenture retention and stability. Materials and Methods: Ten maxillary and mandibular completely edentulous patients were enrolled in the study. A complete denture was fabricated for them. On completion, bite force, retention force, and bone change were recorded. Bite force was recorded with the strain gauge, retention force with the force measurement gauge, and bone changes with radiographs. Conclusion: Single-implant-supported bar mandibular overdenture (SISBOD) can be a suitable standard economic option for edentulous mandible and can greatly improve the quality of life of patients.

Effect of gum-chewing exercise on maintaining and improving oral function in older adults: A pilot randomized controlled trial.

Background/purpose: Gum chewing has been found to improve oral function. Nevertheless, few randomized controlled trials have investigated the effects of gum-chewing exercises on oral function in older adults. This study aimed to examine the effect of gum-chewing exercises on oral function in older adults. Materials and methods: This was a single-blind, randomized controlled trial, conducted from November 2021 to January 2022. A total of 130 participants were divided randomly into the intervention and control groups. The intervention group was told to chew experimental gums for one month, while the control group was instructed to chew experimental tablets for one month. Maximum bite force, occlusal contact areas, oral dryness, tongue pressure, tongue and lip functions (number of times each of the following syllables is pronounced per second:/pa/,/ta/, and/ka/), masticatory function, subjective masticatory function, and gum-chewing time were measured at baseline and one month following intervention to assess outcomes. Results: One month following the intervention, tongue pressure was significantly higher in the intervention group than in the control group (P = 0.027). In the within-group comparisons, maximum bite force (P < 0.001), unstimulated saliva flow (P < 0.001), tongue and lip functions (/pa/: P < 0.001;/ta/: P < 0.001;/ka/: P < 0.001), color scale value (P = 0.019), and ΔE value (P = 0.024) were significantly increased in the intervention group. Conclusion: The results suggest that gum-chewing exercises can improve oral functions in older adults, although additional increases in masticatory load may be necessary to establish a more effective oral function training method using gum-chewing exercises in older adults.

Factors influencing root resorption in retained mandibular second deciduous molars with congenital absence of second premolars: a cross-sectional study.

BACKGROUND: There are currently no studies that quantitatively compare the relationship of root resorption to the patient's systemic history or craniofacial and intraoral morphology, especially in relation to possible host factors. Thus, this study aimed to clarify the factors associated with root resorption in retained mandibular second deciduous molars with the congenital absence of second premolars and predict the prognosis of retained mandibular second deciduous molars. METHODS: A cohort of 5547 patients who visited the orthodontic clinic at Tokyo Medical and Dental University Dental Hospital between 2013 and 2022 was screened. Lateral cephalometric radiographs, panoramic radiographs, upper and lower dental models, and orthodontic treatment questionnaires were used as reference materials to apply the inclusion and exclusion criteria. Ultimately, 111 patients were included in the analyses. The patients were divided into two groups based on the root resorption levels of the retained mandibular second deciduous molars. Those with less root resorption were classified under the good condition (GC) group, whereas those with more root resorption were classified under the poor condition (PC) group. Demographic, clinical, and cephalometric parameters were compared between the groups. A multivariate logistic regression model was used to predict the probability of root resorption. RESULTS: The prevalence of congenitally missing mandibular second premolars with persistent mandibular second deciduous molars was 2.0%. In a total of 111 patients, eighty-three teeth (53.2%) were classified into the GC group, whereas 73 teeth (46.8%) were classified into the PC group. The Frankfort-mandibular plane angle (FMA) [odds ratio (OR): 0.87], Frankfort-mandibular incisor angle (FMIA) (OR: 0.93), overbite (OR: 1.38), adjacent interdental space (OR: 1.46), distance from occlusal plane (OR: 0.80), and caries treatment (OR: 7.05) were significantly associated with the root resorption of the retained mandibular second deciduous molars. CONCLUSIONS: Our findings suggest that skeletal morphology, oral morphological patterns, and history contribute to root resorption in retained mandibular second deciduous teeth with congenital absence of subsequent permanent teeth.

Finite element analysis of Neanderthal and early Homo sapiens maxillary central incisor.

Neanderthal anterior teeth are very large and have a distinctive morphology characterized by robust 'shovel-shaped' crowns. These features are frequently seen as adaptive responses in dissipating heavy mechanical loads resulting from masticatory and non-masticatory activities. Although the long-standing debate surrounding this hypothesis has played a central role in paleoanthropology, is still unclear if Neanderthal anterior teeth can resist high mechanical loads or not. A novel way to answer this question is to use a multidisciplinary approach that considers together tooth architecture, dental wear and jaw movements. The aim of this study is to functionally reposition the teeth of Le Moustier 1 (a Neanderthal adolescent) and Qafzeh 9 (an early Homo sapiens adolescent) derived from wear facet mapping, occlusal fingerprint analysis and physical dental restoration methods. The restored dental arches are then used to perform finite element analysis on the left central maxillary incisor during edge-to-edge occlusion. The results show stress distribution differences between Le Moustier 1 and Qafzeh 9, with the former displaying higher tensile stress in enamel around the lingual fossa but lower concentration of stress in the lingual aspect of the root surface. These results seem to suggest that the presence of labial convexity, lingual tubercle and of a large root surface in Le Moustier 1 incisor helps in dissipating mechanical stress. The absence of these dental features in Qafzeh 9 is compensated by the presence of a thicker enamel, which helps in reducing the stress in the tooth crown.

Impact of clear aligner therapy on masticatory musculature and stomatognathic system: a systematic review conducted according to PRISMA guidelines and the Cochrane handbook for systematic reviews of interventions.

BACKGROUND: Clear aligner therapy has gained popularity as a minimally invasive orthodontic treatment option. However, its impact on the masticatory musculature and the stomatognathic system is an area of growing interest, as it involves the adjustment of occlusion and tooth movement. This systematic review aims to comprehensively assess and synthesise existing evidence regarding the influence of clear aligner therapy on the masticatory musculature and the stomatognathic system. METHODS: An exhaustive search was performed on electronic databases that adhered to PRISMA guidelines. Clinical studies that evaluated the impact of patients receiving aligner orthodontic treatment on the muscles of the mastication and stomatognathic systems were included. A standardised data extraction form was devised for relevant variables. Two reviewers extracted the data variables. ROB-2 was used for bias evaluation in the selected studies. RESULTS: A total of six studies met the inclusion criteria. The wearing of clear aligners significantly impacted the muscles of mastication. Muscle activity and discomfort showed a significant alteration in the initial days of appliance placement. but this observation was temporary, with no significant changes thereafter in subsequent follow-up. Bite force reduction was also noted. All the studies evaluated showed good methodological quality. CONCLUSION: The review found that aligned orthodontic treatment may have a variable impact on muscles of mastication, with a potential for initial exacerbation of symptoms followed by possible improvement. However, due to the limited number of studies and their heterogeneous nature, further robust research is recommended to fully understand the relationship between aligned orthodontic treatment and masticatory muscles.

Linking shape conspicuous asymmetry with shape covariation patterns and performance in the insect head and mandibles.

Bilateral symmetry is widespread across animals, yet, among bilaterians, many cases of conspicuous asymmetries evolved. This means that bilaterally homologous structures on the left and right side display divergent phenotypes. Evolution of such divergent phenotypes between otherwise similarly shaped structures can be thought to be favoured by modularity, but this has rarely been studied in the context of left-right differences. Here, we provide an empirical example, using geometric morphometrics, to assess patterns of asymmetry and covariation between landmark partitions in a grasshopper with conspicuously asymmetric mandibles. Our morphometric data confirms the presence of strictly directional conspicuous asymmetry in the mandibles, and surrounding structures. Covariance patterns and tests hint at a strong integration between mandibles despite their divergent morphologies, and variational modularity with the head capsule. While mandibles have been selected to achieve a key-and-lock morphology by having interlocking shapes, the developmental modularity required to achieve this seems to be overwritten by developmental and/or functional integration, allowing the precise matching required for feeding. The consequent conflicting covariation patterns are reminiscent of the palimpsest model. Finally, the degree of directional asymmetry appears to be under selection, although we find no relationship between bite force and mandible shape or asymmetry.

Minimal clinically important difference in maxillofacial trauma patients: a prospective cohort study.

The present study estimated the minimal clinically important difference (MCID) for pain on a visual analogue scale - numerical rating scale (VAS-NRS) and mean bite force (MBF) in patients treated for maxillofacial trauma (MFT). This cohort study included 120 MFT patients treated according to AO principles. Preoperative and four-week postoperative pain on the VAS-NRS, and MBF were measured to calculate MCIDs as indicators of functional rehabilitation. The patient's perspective of the treatment was assessed using a four-item anchor question. The MCID was determined by two anchor-based approaches, namely, the change difference (CD) method and receiver operating characteristic (ROC) curve method. According to the CD method, the MCID for pain was 2.4 and the MBF was 147.9 N. Based on the ROC curve, the MCID for pain was 2.5 (sensitivity 91.7%, specificity 47.2%) and MBF was 159.1 N (sensitivity 71.4%, specificity 61.1%). This study demonstrated a high sensitivity (>70%) for MCID, which implies that pain reduction of 2.4-2.5 points on the VAS-NRS and a gain in MBF of 147.9-159.1N are clinically relevant for patients treated for MFT.

Influence of occlusal appliances on the masticatory muscle function in individuals with sleep bruxism: A systematic review and meta-analysis.

This systematic review answers the question: "Does occlusal appliance use influence masticatory muscle function of dentate individuals with sleep bruxism?". The literature search included six databases, grey literature, and manual search for articles. Randomized and non-randomized clinical trials were included comparing muscle function of sleep bruxers before and after receiving occlusal appliances. Risk of bias was assessed with risk of bias assessment for randomized and non-randomized clinical trials tool. Twelve studies, three represent randomized clinical trials, were included. Risk of bias was considered low, moderate, or serious. Meta-analyses indicated that soft and hard appliances did not influence muscle activity and bite force of bruxers. Qualitative analysis showed that occlusal appliance use did not influence masticatory performance and muscle volume. However, it was effective in reducing tongue force. Certainty of evidence was considered very low for muscle activity when evaluated with hard appliances, and for bite force evaluated with both appliance materials. Low certainty of evidence was observed for muscle activity with soft appliances. Based on the findings of this meta-analysis, occlusal appliances do not affect masticatory muscle function of sleep bruxers. Regardless of appliance material, the activity of masseter and temporal, and bite force of sleep bruxers was not influenced.

The comparison between various methods of mandibular reconstruction based on finite element analysis.

The Mandible can be damaged by pathological factors, tumors, trauma, infection, and needs a surgical operation for reconstruction and restoring function. There are different methods for the reconstruction of mandible. Based on the surgical approach, primary reconstruction of mandible by reconstruction plate after resection is necessary for maintaining mandibular symmetric and esthetic of the lower third of the face. A finite element model of mandible and masticatory muscles was produced from a normal person (male with 35-year-old). The normal model was resected from the left sixth tooth to the second tooth. The pathological model was reconstructed in different conditions by macro plate. Different conditions were analyzed and compared based on bite force on right fifth tooth, stress developed on screws and macro plate. The finite element analysis results showed that maximum bite force and lower stress on screws were seen in the pathological model (condition 5) when one macro plate and six screws were inserted in the mid-body. The findings showed that the use of two macro plates causes lower stress on it than when we use one. Use of one macro plate and six screws is the best choice in mandibular immobilization which decrease the stress applied on bone and increase the bite force. Because of less stress developed on macro plates and screws, use of two macro plates or one macro plate in mid-body area are also preferred.

Cranial muscle architecture in wild boar: Does captivity drive ontogenetic trajectories?

The jaw system in mammals is complex and different muscle morphotypes have been documented. Pigs are an interesting group of animals as they are omnivorous and have a bunodont crushing dentition. Moreover, they have interacted with humans for over 10,000 years and grow nearly two orders of magnitude in size. Despite being a model system for studies on cranial form and function, data on the growth of the jaw adductor muscles are scant. Moreover, whether captivity impacts the growth and architecture of the jaw adductors remains unknown. Based on dissection data of the jaw adductors of 45 animals ranging from less than 1 kg to almost 100 kg, we show that muscle masses, muscle fiber lengths, and cross-sectional areas scale as predicted for geometrically similar systems or with slight negative allometry. Only the fiber length of the lateral pterygoid muscle grew with slight positive allometry. Animals raised in captivity in stalls or in an enclosure were overall very similar to wild animals. However, some muscles were larger in captive animals. Interestingly, variation in bite force in captive animals was well predicted by the variation in the size of the superficial masseter muscle relative to the overall jaw adductor mass.

Impact of obesity on the structures and functions of the stomatognathic system: A morphofunctional approach.

OBJECTIVE: The prevalence of obesity is increasing significantly worldwide, raising great concern among health professionals. This observational study evaluated the electromyographic activity and thickness of the masseter and temporalis muscles, in addition to the maximum molar bite force, in obese and eutrophic subjects. METHODS: Sixty subjects were divided into three groups: I (7-12 years), II (13-20 years), III (21-40 years) and sex: with 10 men and 10 women for each group. Electromyographic recordings of the masticatory muscles were obtained during mandibular tasks. The masticatory muscles thicknesses were obtained at rest and during dental clenching. The maximum molar bite forces were measured on the right and left sides. The difference in outcome measures between the groups and sex was analyzed using Mann-Whitney U test (p < 0.05) and analysis of covariance (ANCOVA). RESULTS: Electromyographic activity in the masseter and temporal muscles consistently displayed lower levels in obese subjects of both sexes across all three age groups during mandibular tasks. Additionally, greater thickness of the masticatory muscles was observed in obese subjects of both sexes across all three age groups. Obese women in Group II displayed higher values of molar bite force, both on the right and left sides, compared to eutrophic women. On the other hand, women in Group III exhibited higher values of molar bite force on the right side in comparison to eutrophic women. CONCLUSIONS: This study underscores the potential impact of obesity on the morphofunctional aspects of the stomatognathic system in subjects aged 7 to 40 years.

Bite Force Mapping Based on Distributed Fiber Sensing Network Approach.

Bite force measurements are crucial in the realm of biomedical research, particularly in the areas of dentistry and orthodontic care. Various intraoral devices have been used to assess biting force, but each has limitations and drawbacks. Fiber optic sensors (FOSs) offer advantages such as electrical inertness, immunity to electromagnetic interference, and high sensitivity. Distributed fiber optic sensing allows an increase in the number of sensing points and can interrogate numerous reflections from scattering events within an optical fiber. We present four dental bites with heights of 6 mm, which enabled bilateral measurements. U-shaped sensors were prepared by embedding fibers into silicone by folding a single-mode fiber into four lines and multiplexing eight parallel nanoparticle-doped fibers. Dental bite models were created using two silicone materials (Sorta Clear 18 and Sorta Clear 40). The developed sensors were calibrated by applying weights up to 900 g, resulting in a linear response. Experiments were conducted to compare the efficacy of the dental bites. The collection of massive data was enabled by constructing a 2D map of the dental bites during multi-point sensing.

Changes in occlusion after orthognathic surgery: a systematic review and meta-analysis.

PURPOSE: This study aims to systematically review and identify the changes of occlusion in patients after orthognathic surgery. METHODS: The protocol was developed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Protocols (PRISMA-P) and was registered to the International Prospective Register of Systematic Reviews (PROSPERO) under the registration number CRD42021253129. Studies included were Original articles only, Additionally, studies were included if the outcome of occlusal force was measured pre- and postoperatively and if occlusal forces resulted from a long follow-up of a minimum of 1 year following orthognathic surgery using adequate measurement tools. Non-English articles, case reports, case series, and non-original articles, including systematic reviews and literature reviews, were excluded. RESULTS: The search strategy yielded a total of 978 articles. Of the 978 articles, 285 were duplicates. After reading the titles and abstracts, 649 articles were excluded, and full-text articles of the remaining 47 studies were reviewed independently by two authors for eligibility wherein 33 articles were excluded, because they did not meet the inclusion criteria. Finally, a total of 14 studies were processed for critical review. CONCLUSION: The occlusal force increased after orthognathic surgery, although not to the level of the control group; however, the maximal bite force remained unchanged. Immediately after orthognathic surgery, chewing and swallowing forces increased. Significant reductions in the postoperative occlusal contact pressure areas was also observed.

The effect of a soft diet on molar dentin formation during the occlusal establishment period.

OBJECTIVE: This study intends to investigate the effect of a soft food diet on molar dentin formation during the occlusal establishment period. It can provide dietary guidance for infants to strengthen their dental structure. DESIGN: 60 BALB/c mice were used to obtain mandibles during lactation (P0.5, P7.5, P15.5, P21.5) and occlusal establishment (P27.5, P33.5, P60.5). The mice were randomly divided into soft or hard diet groups after weaning at day 21.5. Hematoxylin-eosin and aniline blue staining were used to observe the morphology and number of odontoblasts and the amount of molar dentin formation. Immunohistochemistry was performed to observe the proliferation and apoptosis of odontoblasts. The in vivo fluorescence double-labeling was applied to evaluate the rate of molar dentin formation. RESULTS: The soft diet group had poorer periodontal membrane development but more cervical dentin deposition. Alterations in morphology and the number of odontoblasts showed a stronger correlation with age rather than food hardness. There are no significant differences in proliferative and apoptotic behavior of dentin-forming cells between the two groups. Rather, it affected the rate of dentin deposition. The rate of dentin deposition was high in the soft diet group from P21.5 to P27.5, but it was surpassed by the hard diet group within P27.5-P33.5, and the difference between the two groups disappeared at P33.5-P60.5. CONCLUSIONS: A soft diet promotes molar early cervical dentin formation. This advantage is caused by an enhanced odontoblast secretion rate rather than affecting the morphology, number, proliferation, or apoptosis of odontoblasts.

Effect of botulinum toxin type A on muscular temporomandibular disorder: A systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: Botulinum toxin type A (BTX-A) is increasingly used to manage painful temporomandibular disorders (TMD). However, the effect of BTX-A on muscular TMD remains unclear. OBJECTIVE: To assess the efficacy, safety and optimal dose of BTX-A for treating TMD. METHODS: We conducted systematic literature searches in MEDLINE, Embase, Web of Science, ClinicalTrials.gov and Cochrane Library until March 2023. We extracted data from randomized controlled trials (RCTs) that evaluated the efficacy and safety of BTX-A in treating muscular TMD. We performed a meta-analysis using a random-effects model. RESULTS: Fifteen RCTs involving 504 participants met the inclusion criteria. BTX-A was significantly more effective than placebo in reducing pain intensity, as measured on a 0-10 scale, at 1 month (MD [95% CI] = -1.92 [-2.87, -0.98], p < .0001) and 6 months (MD [95% CI] -2.08, [-3.19 to -0.98]; p = .0002). A higher dosage of BTX-A (60-100 U bilaterally) was associated with a greater reduction in pain at 6 months (MD [95% CI] = -2.98 [-3.52, -2.44]; p < .001). BTX-A also resulted in decreased masseter muscle intensity (µV) (MD [95% CI] = -44.43 [-71.33, -17.53]; p = .001) at 1 month and occlusal force (kg) at 3 months (MD [95% CI] = -30.29 [-48.22 to -12.37]; p = .0009). There was no significant difference in adverse events between BTX-A and placebo. CONCLUSIONS: BTX-A is a safe and effective treatment for reducing pain and improving temporomandibular muscle and joint function in muscular TMD patients. A bilateral dose of 60-100 U might be an optimal choice for treating muscular TMD pain.

Safety and Efficacy of Resveratrol in Healing of Maxillofacial Fractures: A Randomized Controlled Study.

Objectives: To assess the efficacy of resveratrol in improving functional outcomes following open reduction and internal fixation of maxillofacial fractures. Study Design: A single-center, randomized, parallel group, prospective, double-blind clinical trial was conducted on 40 patients between the age 20 and 60 years, requiring open reduction and internal fixation of maxillofacial fractures. The selected patients were randomly divided into two groups, Group 1 (placebo) and Group 2 (resveratrol) where tablets resveratrol 500 mg were given twice daily for 1 month following open reduction and internal fixation of fractured segments. Bite force was calculated pre-operatively and on the 1st, 4th, 8th and 12th week postoperatively. Serum markers osteocalcin and alkaline phosphate were calculated pre-operatively and at 4th and 12th week postoperatively. Results: Bite force (690.55 ± 262.00) in the resveratrol group was higher than the placebo group (553.27 ± 300.08) at 12th week postoperatively. However, the difference was non-significant statistically (p = 0.132). Resveratrol group (116.80 ± 55.25) showed better maintenance of serum ALP level as compared to placebo group (107.90 ± 42.99) at 12th week postoperatively, but again it lacked statistical significance (p = 0.573). Resveratrol group after initial reduction at 4th week showed serum osteocalcin levels nearly equal to the preoperative values at 12th week, while the placebo group showed a decline both at 4th and 12th week postoperatively. However, these results were not statistically significant (p = 0.065). Conclusion: There was no statistically significant difference in bite force, serum ALP level and serum osteocalcin levels between placebo group and resveratrol group. Though not statistically significant but early increased level of serum osteogenic markers, better restoration of bite force in group 2 (tab. Resveratrol) indicates toward its possible optimistic role in maxillofacial fracture healing. More studies with larger sample sizes are needed in order to confirm the efficacy of this drug in maxillofacial fracture.

Comparative Evaluation of Masticatory Bite Force in Mandible Fractures Treated with Three-Dimensional Curved Locking Strut Plate Versus Straight Locking Miniplate.

Aims and Objectives: To compare the efficacy of titanium 2.0-mm curved locking strut plate and 2.0-mm straight locking miniplate with regard to their intraoperative use and the stability of fixation achieved both, clinically and radiographically. Materials and Methods: Forty patients with 62 sites of mandibular fractures requiring open reduction and internal fixation were included in the study. The sample was divided into two groups of twenty patients each depending upon whether patient received three-dimensional 2.0-mm locking curved strut plate (group A) or 2.0-mm straight locking miniplates (group B). Mouth opening, teeth in the fracture line, degree of displacement, time taken, neurosensory and bite force evaluation were done preoperatively, 1st, 7th day, 2nd week, 4th week, 6th week and 12th week postoperatively. Results: Positive correlation was found between preoperative and postoperative bite force values at subsequent follow-up weeks. At 3rd month evaluation, the change in bite force from the previous follow-up visit was significantly greater in group A (locking strut plate) than group B (locking miniplate) in the incisor, left molar and right molar region. Statistically significant difference was observed between the two groups regarding time taken (P < 0.016) depicting less time taken for placement of three-dimensional 2.0-mm locking curved strut plate(group A) 20.30 ± 4.85 min as compared to 27.30 ± 6.82 min for fixation with 2.0 mm straight locking miniplates in group B. Conclusion: The findings were suggestive that the both systems had better adaptation during fixation, comparable radiographic reduction and increased stability in postoperative period. However, 3D locking strut plate took relatively lesser operative time, offered good rigidity and better stabilization of fractured segments in three dimensions along with significant improvement in the masticatory bite force postoperatively.

Root resorption during maxillary molar intrusion with clear aligners: a randomized controlled trial.

OBJECTIVES: To compare changes in maxillary molar root resorption, intrusion amount, dentoskeletal measures, and maximum bite force (MBF) between clear aligners (CA) and fixed appliances with miniscrew (FM) during molar intrusion. MATERIALS AND METHODS: Forty adults with anterior open bite were randomized into either CA or FM groups. Lateral cephalograms, cone-beam computed tomography (CBCT), and MBF were collected at pretreatment (T0) and 6 months of treatment (T1). Maxillary molar intrusion in FM were intruded by nickel-titanium (NiTi) closed-coil spring delivered force (150 grams/side) while clear aligners combined with squeezing exercise were performed in CA. Parametric tests were used for statistical analysis. RESULTS: After 6 months of treatment, significant root resorption of 0.21-0.24 mm in CA and 0.38-0.47 mm in FM were found while maxillary molars were intruded 0.68 and 1.49 mm in CA and FM, respectively. CA showed significant less root resorption and intrusion than FM. Overbite, bite closing, and MBF increased significantly. CA showed significantly less overbite and SN-MP changes but more MBF increase than FM. MBF in CA was correlated with the amount of maxillary molar intrusion (r = 0.736, P < .05). CONCLUSIONS: Maxillary molar intrusion and root resorption in CA were half the amount in FM in 6 months. The amount of maxillary molar root resorption was one-third of the intrusion distance. CA displayed less overbite increase and bite closing but more MBF increase than FM. MBF in CA was positively correlated with the molar intrusion amount.